Version 7.6.1.0 Introduced on the C-Series.
Example
FTOS#show buffer-profile summary fp-uplink
Linecard Port-set Buffer-profile
0 0 test1
4 0 test2
FTOS#
Related
Commands
buffer-profile (Configuration) – creates a buffer profile that can be applied to an interface.
show buffer-profile interface
Display the buffer profile that is applied to an interface.
C-Series, S-Series
Syntax
show buffer-profile {detail | summary} interface interface
slot/port
Parameters
detail Display the buffer allocations of a buffer profile.
summary Display the Field Processors and Switch Fabric Processors that are
applied to line card port-pipes in the system.
interface
interface
Enter the keyword interface followed by the interface type, either
gigabitethernet or tengigabitethernet.
slot/port
Enter the slot and port number of the interface.
Defaults none
Command Modes INTERFACE
Command History
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Example
FTOS#show buffer-profile detail csf linecard 4 port-set 0
Linecard 4 Port-set 0
Buffer-profile test
Queue# Dedicated Buffer Buffer Packets
(Bytes)
0 36960 718
1 18560 358
2 18560 358
3 18560 358
4 9600 64
5 9600 64
6 9600 64
7 9600 63
FTOS#
Related
Commands
buffer-profile (Configuration) – creates a buffer profile that can be applied to an interface.
578
To Next Page
Loading...
