show ipv6 mld_host
Display the IPv6 MLD host counters.
S4810
Syntax
show ipv6 mld_host
Command Modes EXEC
Command History
Version 8.3.12.0 Introduced on the S4810.
Usage
Information
The following describes the show ipv6 mld-host command shown in the Example
below:
Field Description
Valid MLD Packets The total number of packets received and sent from the last time the
elapsed time was cleared.
Reports The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or sent.
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed Packets The number of MLDv1 and MLDv2 packets that do not match the
requirement for a valid MLD packet.
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
Received Sent
Valid MLD Packets 97962 18036
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
853
To Next Page
Loading...
