Dell Force10 Z9000 - 47 SNMP Traps

47
SNMP Traps
This chapter lists the traps sent by the Dell Force10 operating software (FTOS). Each trap is listed by the fields Message
ID, Trap Type, and Trap Option.
Message ID Trap Type Trap Option
COLD_START SNMP COLDSTART
%SNMP-5-SNMP_COLD_START: SNMP COLD_START trap sent.
WARM_START SNMP WARMSTART
COPY_CONFIG_COMPLETE SNMP NONE
SNMP Copy Config Command Completed
LINK_DOWN SNMP LINKDOWN
%IFA-1-PORT_LINKDN: changed interface state to
down:%d
LINK_UP SNMP LINKUP
%IFA-1-PORT_LINKUP: changed interface state to up:
%d
AUTHENTICATION_FAIL SNMP AUTH
%SNMP-3-SNMP_AUTH_FAIL: SNMP Authentication
failed.Request with invalid community string.
EGP_NEIGHBOR_LOSS SNMP NONE
OSTATE_DOWN SNMP LINKDOWN
%IFM-1-OSTATE_DN: changed interface state to down:
%s
%IFM-5-CSTATE_DN:Changed interface Physical state
to down: %s
OSTATE_UP SNMP LINKUP
%IFM-1-OSTATE_UP: changed interface state to up:%s
%IFM-5-CSTATE_UP: Changed interface Physical state
to up: %s
RMON_RISING_THRESHOLD SNMP NONE
%RPM0-P:CP %SNMP-4-RMON_RISING_THRESHOLD: RMON
rising threshold alarm from SNMP OID <oid>
RMON_FALLING_THRESHOLD SNMP NONE
%RPM0-P:CP %SNMP-4-RMON_FALLING_THRESHOLD: RMON
falling threshold alarm from SNMP OID <oid>
RMON_HC_RISHING_THRESHOLD SNMP NONE
1395