Dell Force10 Z9000 - Graceful-Restart Interval; Graceful-Restart T1

graceful-restart interval
Set the graceful restart grace period, the time during that all graceful restart attempts are prevented.
E-Series, S4810
Syntax
graceful-restart interval minutes
To return to the default, use the no graceful-restart interval command.
Parameters
minutes Enter the graceful-restart interval minutes. The range is 1 to 20
minutes. The default is 5 minutes.
Defaults 5 minutes
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
graceful-restart t1
Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the interval
before the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is received from the
helping router.
E-Series, S4810
Syntax
graceful-restart t1 {interval seconds | retry-times value}
To return to the default, use the no graceful-restart t1 command.
Parameters
interval Enter the keyword interval to set the wait time. The range is 5 to
120 seconds. The default is 5 seconds.
retry-times Enter the keywords retry-times to set the number of times the
request interval is extended until a CSNP is received from the helping
router. The range is 1 to 10 attempts. The default is
1.
Defaults Refer to Parameters.
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
869