Dell Force10 Z9000 - Fip-Snooping Port-Mode Fcoe-Trusted; Show Fip-Snooping Config

fip-snooping port-mode fcoe-trusted
Configure the port for bridge-to-bridge links.
S4810 and MXL Switch
Syntax
fip-snooping port-mode fcoe-trusted
To remove the bridge-to-bridge link configuration from the port, use the no fip-snooping
port-mode fcoe-trusted command.
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage
Information
The maximum number of FCoE VLANs supported on the switch is eight.
show fip-snooping config
Display the FIP snooping status and configured FC-MAP values.
S4810 and MXL Switch
Syntax
show fip-snooping config
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Example
FTOS# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN Enabled FC-MAP
---- ------- --------
100 TRUE 0X0EFC00
629