Dell Force10 Z9000 - Show Bfd Counters

show bfd neighbors – displays the BFD neighbor information on all interfaces or a specified
interface.
show bfd counters
Display BFD counter information.
C-Series, E-Series
Syntax
show bfd counters [bgp | isis | ospf | vrrp | static-route]
[interface]
Parameters
interface Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet and then enter the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet and then enter the slot/port
information.
• For a SONET interface, enter the keyword sonet and then
enter the slot/ port information.
• For a port-channel interface, enter the keyword port-
channel
and then enter a number. For the C-Series, the
range is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
• For VLAN interfaces, enter the keyword vlan and then enter
a number from 1 to 4094. For ExaScale VLAN interfaces, the
range is 1 to 2730 (VLAN IDs can be 0 to 4093).
bgp (OPTIONAL) Enter the keyword bgp to display counter information for
BFD sessions established with BGP neighbors.
isis (OPTIONAL) Enter the keyword isis to display counter information
for BFD sessions established with ISIS neighbors. This option is not
available on the C-Series.
ospf (OPTIONAL) Enter the keyword ospf to display counter information
for BFD sessions established with OSPF neighbors.
static-route (OPTIONAL) Enter the keyword static-route to display counter
information for BFD sessions established with ISIS neighbors.
vrrp (OPTIONAL) Enter the keyword vrrp to display counter information
for BFD sessions established with VRRP neighbors.
Defaults none
Command Modes
• EXEC
324