Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show fip-snooping sessions command shown in the
Example below.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
FCF Interface Slot/ port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FCoE MAC MAC address of the FCoE session the FCF assigns.
FC-ID Fibre Channel ID the FCF assigns.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
Example
FTOS# show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN FCoE MAC
FC-ID Port WWPN
Port WWNN
----------------------------------------------
00:00:c9:f1:e1:37 Te 0/28 54:7f:ee:34:77:4e Te 1/47 111
0e:fc:00:b5:00:07 b5:00:07 10:00:00:00:c9:f1:e1:37
20:00:00:00:c9:f1:e1:37
00:c0:dd:12:c0:05 Te 1/26 54:7f:ee:34:77:4e Te 1/47 111
0e:fc:00:b5:00:75 b5:00:75 21:00:00:c0:dd:12:c0:05
20:00:00:c0:dd:12:c0:05
show fip-snooping statistics
Display statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port channels.
S4810 and MXL Switch
Syntax
show fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
632
To Next Page
Loading...
