Dell Force10 Z9000 - Show Qos Qos-Policy-Output; Show Qos Statistics

show qos qos-policy-output
View the output QoS policy details.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show qos qos-policy-output [qos-policy-name]
Parameters
qos-policy-name Enter the QoS policy name.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
FTOS#show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
show qos statistics
View QoS statistics.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
wred-profile
interface
Platform—E-Series Only: Enter the keywords wred-profile and
optionally one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
1223