Dell Force10 Z9000 - Debug Ip Bgp Events; Debug Ip Bgp Keepalives

debug ip bgp events
Display information on local BGP state changes and other BGP events.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events
[in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] events command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound
BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound
BGP messages.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp keepalives
Display information about BGP keepalive messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
353