Dell Force10 Z9000 - Show Ip Pim Ssm-Range

When you configure the SSM range, FTOS supports SSM for configured group range as well as
the default SSM range.
When you remove the SSM ACL, PIM SSM is supported for the default SSM range only.
show ip pim ssm-range
Display the non-default groups added using the SSM range feature.
C-Series, E-Series, S-Series, Z-Series
Syntax
show ip pim ssm-range
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
1148