Dell Force10 Z9000 - Ip Ftp Password; Ip Ftp Source-Interface

ip ftp password
Specify a password for outgoing FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp password
[password] command.
Parameters
encryption-type (OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
password Enter a string up to 40 characters as the password.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The password is listed in the configuration file; you can view the password by entering the
show running-config ftp command.
The password configured by the ip ftp password command is used when you use the
ftp: parameter in the copy command.
Related
Commands
copy – copy files.
ip ftp username – sets the user name for the FTP sessions.
ip ftp source-interface
Specify an interface’s IP address as the source IP address for FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip ftp source-interface interface
116