Dell Force10 Z9000 - Bgp Log-Neighbor-Changes; Bgp Non-Deterministic-Med

Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In Receiver
Only mode, BGP saves the advertised routes of peers that support this capability when they
restart.
BGP graceful restart is active only when the neighbor becomes established. Otherwise it is
disabled. Graceful-restart applies to all neighbors with established adjacency.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
C-Series, E-Series, S-Series, Z-Series
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Use the show logging command in EXEC mode to view BGP neighbor resets.
The bgp log-neighbor-changes command appears in the show config command
output.
Related
Commands
show logging – views logging settings and system messages logged to the system.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do not have their
MEDs compared).
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
343