Dell Force10 Z9000 - Clear Ip Bgp

Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced
Related
Commands
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6) – enables capture of an IPv6 BGP neighbor packet.
show capture bgp-pdu neighbor – displays BGP packet capture information for an IPv6
address on the E-Series.
clear ip bgp
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
C-Series, E-Series, S-Series, Z-Series
Syntax
clear ip bgp * | as-number | ip-address [flap-statistics | soft
[in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
as-number Enter the AS number to reset all neighbors belonging to that AS. The
range is 0 to 65535 (2-byte), 1 to 4294967295 (4-byte), or 0.1 to
65535.65535 (dotted format).
ip-address Enter an IP address in dotted decimal format to reset all prefixes from
that neighbor.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to reset the
flap statistics on all prefixes from that neighbor.
soft (OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter the clear ip bgp ip-address soft
command, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound
policies.
<1-4294967295> Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65535> Enter <0.1-65535.65535> to clear peers with the AS number in dot
format.
A.B.C.D Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X Enter the BGP neighbor address in the X:X:X:X::X format to clear.
dampening Enter the keyword dampening to clear the flap dampening
information.
348