Dell Force10 Z9000 - Dot1 X Quiet-Period; Dot1 X Reauthentication

Version 7.4.1.0 Introduced on the E-Series.
Usage
Information
The authenticator completes authentication only when port-control is set to auto.
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is 1 to 65535. The default is
60.
Defaults 60 seconds
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
dot1x reauthentication
Enable periodic reauthentication of the client.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication command.
Parameters
interval seconds (Optional) Enter the keyword interval followed by the interval
time, in seconds, after which reauthentication is initiated. The range
is 1 to 31536000 (one year). The default is 3600 (1 hour).
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
203