Dell Force10 Z9000 - Debug Ip Bgp Ipv6 Unicast Updates; Distance Bgp

debug ip bgp ipv6 unicast updates
View information about BGP updates.
E-Series
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-address
prefix-length updates [in | out] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 7.4.1.0 Introduced
distance bgp
Define an administrative distance for routes.
E-Series
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
internal-distance Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
Defaults
• external-distance = 20
518