Dell Force10 Z9000 - Copy

Usage
Information
A system message appears stating that the bootflash image has been changed. You must
reload the system before the system can switch to the new bootflash image.
copy
Copy one file to another location. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field).
C-Series, E-Series, S-Series
Syntax
copy source-file-url destination-file-url
Parameters
Enter the following location keywords and information:
file-url
To copy a file
from the internal
FLASH
enter flash:// followed by the filename
To copy a file on
an FTP server
enter ftp://
user:password@hostip/filepath
To copy a file
from the internal
FLASH on RPM0
enter rpm0flash://filepath
To copy a file
from the external
FLASH on RPM0
enter rpm0slot0://filepath
To copy a file
from the internal
FLASH on RPM1
enter rpm1flash://filepath
To copy a file
from the external
FLASH on RPM1
enter rpm1slot0://filepath
To copy the
running
configuration
enter the keyword running-config
To copy the
startup
configuration
enter the keyword startup-config
To copy using a
Secure Copy
(SCP),
enter the keyword scp:
• If you enter scp: in the source
position, enter the target URL;
• If you enter scp: in the target
position, first enter the source URL;
64