Dell Force10 Z9000 - Show Isis Hostname; Show Isis Interface

show isis hostname
Display IS-IS host names configured or learned on the E-Series.
E-Series, S4810
Syntax
show isis hostname
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Example
FTOS#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 Force10 ISIS
FTOS#
show isis interface
Display detailed IS-IS interface status and configuration information.
E-Series, S4810
Syntax
show isis interface [interface]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For Loopback interface, enter the keyword loopback
followed by a number from zero (0) to 16383.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
899