---------------------------------------------
CP DOWNLOAD BOOT invalid invalid
RP1 DOWNLOAD BOOT invalid invalid
RP2 DOWNLOAD BOOT invalid invalid
linecard 0 is not present.
linecard 1 DOWNLOAD BOOT invalid invalid
linecard 2 DOWNLOAD BOOT 4.7.5.387 6.5.1.8
linecard 3 DOWNLOAD BOOT invalid invalid
linecard 4 DOWNLOAD BOOT invalid invalid
linecard 5 is not present.
Peer RPM:
=============================================
Type Boot Type A B
---------------------------------------------
CP DOWNLOAD BOOT invalid invalid
RP1 DOWNLOAD BOOT invalid invalid
RP2 DOWNLOAD BOOT invalid invalid
show bootvar
Display the variable settings for the E-Series boot parameters.
C-Series, E-Series, Z-Series, S4810
Syntax
show bootvar
Command Modes EXEC Privilege
Command History
Version 8.3.11.4 Output expanded to display current reload mode (normal or
Jumpstart).
Version 8.3.11.1 Introduced on the Z9000.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
FTOS#show bootvar
PRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin
SECONDARY IMAGE FILE = variable does not exist
DEFAULT IMAGE FILE = flash://FTOS-ED-5.3.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
FTOS#
75
To Next Page
Loading...
