Dell Force10 Z9000 - Dei Honor

Command Modes CONFIGURATION
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the C-Series and S-Series.
dei honor
Honor the incoming DEI value by mapping it to an FTOS drop precedence. You may enter the command once for 0 and
once for 1.
C-Series, S-Series, Z-Series, S4810
Syntax
dei honor {0 | 1} {green | red | yellow}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | red |
yellow
Choose a color:
• Green: High priority packets that are the least preferred to
be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
• Red: Lowest priority packets that are always dropped
(regardless of congestion status).
Defaults Disabled; Packets with an unmapped DEI value are colored green.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the C-Series and S-Series.
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
dei enable – enables DEI.
1446