Dell Force10 Z9000 - Show Interfaces Debounce; Show Interfaces Description

Related
Commands
dampening – configures dampening on an interface.
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces configured – displays any interface with a non-default configuration.
show interfaces debounce
Display information on interfaces with the debounce timer configured.
E-Series
Syntax
show interfaces debounce interface
Parameters
interface (Optional) Enter one of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.7.1.0 Introduced on the E-Series.
Related
Commands
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces description
Display the descriptions configured on the interface.
C-Series, E-Series, S-Series
Syntax
show interfaces [interface] description
730