Dell Force10 Z9000 - Show Rmon Log

Example (Index)
FTOS#show rmon history 6001
RMON history control entry 6001
interface: ifIndex.100974631 GigabitEthernet 2/0
bucket requested: 1
bucket granted: 1
sampling interval: 5 sec
owner: 1
status: OK
FTOS#
Example (Brief)
FTOS#show rmon history brief
index ifIndex interface
---------------------------------------
6001 100974631 GigabitEthernet 2/0
6002 100974631 GigabitEthernet 2/0
6003 101236775 GigabitEthernet 2/1
6004 101236775 GigabitEthernet 2/1
9001 134529054 GigabitEthernet 3/0
9002 134529054 GigabitEthernet 3/0
9003 134791198 GigabitEthernet 3/1
9004 134791198 GigabitEthernet 3/1
FTOS#
show rmon log
Display the contents of the RMON log table.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show rmon log [index] [brief]
Parameters
index (OPTIONAL) Enter the table index number to display just that entry.
brief (OPTIONAL) Enter the keyword brief to display the RMON log table
in an easy-to-read format.
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
Usage
Information
The log table has a maximum of 500 entries. If the log exceeds that maximum, the oldest log
entry is purged to allow room for the new entry.
1269