Dell Force10 Z9000 - Clear Ip Bgp Ipv4 Multicast; Clear Ip Bgp Dampening

Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
clear ip bgp ipv4 multicast
Reset MBGP sessions.
C-Series, E-Series TeraScale, S-Series
Syntax
clear ip bgp ipv4 multicast * ip-address [dampening | flap-
statistics] peer-group]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ip-address Enter an IP address in dotted decimal format to clear the prefixes
from that neighbor.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap
dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the
flap statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members
of a peer-group.
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
clear ip bgp dampening
Clear information on route dampening.
C-Series, E-Series TeraScale, S-Series
Syntax
clear ip bgp dampening ipv4 multicast network network-mask
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
network (OPTIONAL) Enter the network address in dotted decimal format
(A.B.C.D).
network-mask (OPTIONAL) Enter the network mask in slash prefix format (/x).
Command Modes EXEC Privilege
420