Dell Force10 Z9000 - Show Fip-Snooping Sessions

Parameters
fcf-mac-address Enter the MAC address of the FCF to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show fip-snooping fcf command shown in the Example
below.
Field Description
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FC-MAP FC-Map value the FCF advertises.
ENode Interface Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIOD Time (in milliseconds) during which FIP keep-alive advertisements
transmit.
No of ENodes Number of ENodes connected to the FCF.
FC-ID Fibre Channel session ID the FCF assigns.
Example
FTOS# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22 100 0e:fc:00 4000
2
show fip-snooping sessions
Display information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE session ID number (FC-ID),
worldwide node name (WWNN) and the worldwide port name (WWPN).
S4810 and MXL Switch
Syntax
show fip-snooping sessions [interface vlan vlan-id]
Parameters
vlan-id Enter the vlan-id of the specified VLAN to be displayed.
631