Dell Force10 Z9000 - Show Spanning-Tree Mst Configuration; Show Config

Related
Commands
msti – maps the VLAN(s) to an MST instance.
name – assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
Example
FTOS(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
FTOS(conf-mstp)#
show spanning-tree mst configuration
View the multiple spanning tree configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show spanning-tree mst configuration
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
999