Dell Force10 Z9000 - Neighbor Distribute-List

route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
neighbor distribute-list
Distribute BGP information via an established prefix list.
E-Series
Syntax
neighbor [ipv6-address | peer-group-name] distribute-list
prefix-list-name [in | out]
To delete a neighbor distribution list, use the no neighbor [ipv6-address | peer-
group-name
] distribute-list prefix-list-name [in | out] command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list. If you do not configure
the prefix list, the default is permit (to allow all routes).
in Enter the keyword in to distribute only inbound traffic.
out Enter the keyword out to distribute only outbound traffic.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
Usage
Information
Other BGP filtering commands include the neighbor filter-list and neighbor
route-map commands.
Related
Commands
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map – assigns a route map to a neighbor or peer group.
521