Dell Force10 Z9000 - Show Ip Bgp Peer-Group; Show Ip Bgp Summary

show ip bgp peer-group
Allows you to view information on the BGP peers in a peer group.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast peer-group [peer-group-name [detail
| summary]]
Parameters
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
detail (OPTIONAL) Enter the keyword detail to view detailed status
information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in the show ip bgp summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Version 7.5.1.0 Added the detail option.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp peer-group (multicast) – views information on the BGP peers in a peer group.
show ip bgp summary
Allows you to view the status of all BGP connections.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast summary
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
442