Dell Force10 Z9000 - Show Ip Bgp Ipv6 Unicast Extcommunity-List; Show Ip Bgp Ipv6 Unicast Filter-List

Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
show ip bgp ipv6 unicast extcommunity-list
View information on all routes with Extended Community attributes.
C-Series, E-Series, S-Series
Syntax
show ip bgp ipv6 unicast extcommunity-list [list name]
Parameters
list name Enter the extended community list name you wish to view.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
summary
command. The text line above the route table states the number of COMMUNITY
attributes found.
The show ip bgp community command without any parameters lists BGP routes with at
least one BGP community attribute and the output is the same as for the show ip bgp
command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
C-Series, E-Series
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
504