Dell Force10 Z9000 - Ftp-Server Topdir; Ftp-Server Username

ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
C-Series, E-Series, S-Series, Z-Series
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell
Force10 recommends specifying a top-level directory path. Without a top-level directory path
specified, the FTOS directs users to the flash directory when logging in to the FTP server.
Related
Commands
ftp-server enable – enables FTP server functions on the E-Series.
ftp-server username – sets a username and password for incoming FTP connections to the E-
Series.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
C-Series, E-Series, S-Series, Z-Series
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username command.
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password followed by a string up to 40
characters long as the password. Without specifying an encryption
type, the password is unencrypted.
114