Dell Force10 Z9000 - Clear Ip Bgp Ipv6-Address

clear ip bgp ipv6-address
Reset BGP sessions specific to an IPv6 address on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears
the policies without resetting the TCP connection.
C-Series, E-Series
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
ipv6-address Enter an IPv6 address to reset neighbors belonging to that IP. Used
without a qualifier, the keyword resets all neighbors belonging to that
IP.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all
flap statistics belonging to that AS or a specified address family
within that IP.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that
address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that
address family.
unicast (OPTIONAL) Enter the keyword unicast to select the unicast option
within the selected address family.
multicast (OPTIONAL) Enter the keyword multicast to select the multicast
option within the selected address family. Multicast is supported on
IPv4 only
soft (OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address soft,
both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound
policies.
Command Modes EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
469