Dell Force10 Z9000 - Show Ip Route

Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Regular evaluation optimization enabled/disabled added to display
output.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
FTOS#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#
show ip route
View information, including how they were learned, about the IP routes on the switch.
C-Series, E-Series, Z-Series, S4810
Syntax
show ip route [vrf [vrf name] hostname | ip-address [mask]
[longer-prefixes] | list prefix-list | protocol [process-id |
routing-tag] | all | connected | static | summary]
Parameters
vrf name E-Series Only: Clear only the route entries tied to the VRF process.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the
device to view more detailed information about the route.
822