Dell Force10 Z9000 - Clear Counters Vrrp; Debug Vrrp

password Enter a character string up to eight characters long as a password. If
you do not enter an encryption-type, the password is stored as clear
text.
Defaults Not configured.
Command Modes VRRP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
The given password is encrypted by the system and the show config displays an encrypted
text string for any of the encrypted typed used.
clear counters vrrp
Clear the counters maintained on VRRP operations.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear counters vrrp [vrrp-id]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range is 1 to
255.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
debug vrrp
Allows you to enable debugging of VRRP.
C-Series, E-Series, Z-Series
Syntax
debug vrrp interface [vrrp-id] {all | database |interface ||
packets | state | timer}
1472