show snmp user
Display the information configured on each SNMP user name.
C-Series, E-Series, S-Series, Z-Series
Syntax
show snmp user
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Example
FTOS#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
FTOS#
snmp ifmib ifalias long
Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters.
C-Series, E-Series, S-Series, Z-Series
Syntax
snmp ifmib ifalias long
Defaults Interface description truncated beyond 63 characters.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
unknown Introduced on the E-Series.
Example
!----command run on host connected to switch:------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i
1364
To Next Page
Loading...
