Dell Force10 Z9000 - Show Processes Cpu (S-Series)

PI D Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0x00000090 140 14 10000 0.00% 0.00% 0.00% 0 vrrp
0x0000008d 120 12 10000 0.00% 0.00% 0.00% 0 fvrp
0x00000088 360 36 10000 0.00% 0.00% 0.00% 0 xstp
0x00000084 60 6 10000 0.00% 0.00% 0.00% 0 span
0x00000083 180 18 10000 0.00% 0.00% 0.00% 0 pim
0x00000080 80 8 10000 0.00% 0.00% 0.00% 0 igmp
0x0000007b 130 13 10000 0.00% 0.00% 0.00% 0 ipm2
0x00000078 700 70 10000 0.00% 0.00% 0.00% 0 mrtm
0x00000074 100 10 10000 0.00% 0.00% 0.00% 0 l2mgr
0x00000070 80 8 10000 0.00% 0.00% 0.00% 0 l2pm
0x0000006c 80 8 10000 0.00% 0.00% 0.00% 0 arpm
0x00000068 60 6 10000 0.00% 0.00% 0.00% 0 acl2
0x00000064 750 75 10000 0.00% 0.00% 0.00% 0 sysd2
0x00000062 0 0 0 0.00% 0.00% 0.00% 0 sysmon
0x00000024 880 88 10000 0.00% 0.00% 0.00% 0 sshd
0x00000022 0 0 0 0.00% 0.00% 0.00% 0 inetd
0x00000020 2250 225 10000 0.00% 0.00% 0.00% 0
mount_mfs
0x00000013 0 0 0 0.00% 0.00% 0.00% 0
mount_mfs
0x00000006 100 10 10000 0.00% 0.00% 0.00% 0 sh
0x00000005 0 0 0 0.00% 0.00% 0.00% 0 aiodoned
0x00000004 960 96 10000 0.00% 0.00% 0.00% 0 ioflush
0x00000003 140 14 10000 0.00% 0.00% 0.00% 0 reaper
0x00000002 0 0 0 0.00% 0.00% 0.00% 0
pagedaemon
0x00000001 160 16 10000 0.00% 0.00% 0.00% 0 init
0x00000000 700 70 10000 0.00% 0.00% 0.00% 0 swapper
0x00000098 140 14 10000 0.00% 0.00% 0.00% 0 msdp
show processes cpu (S-Series)
Display CPU usage information based on processes running in an S-Series or Z-Series.
S-Series, Z-Series
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit
id | summary | ipc | memory [stack-unit id]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The
1-99 variable sets the number of tasks to display in order of the
highest CPU usage in the past five (5) seconds. Add the keyword
details to display all running processes (except sysdlp). Refer to
Example (management-unit).
stack-unit id (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID.
As an option of the show processes cpu command, this option
displays CPU usage for the designated stack member. Or, as an
option of the command, this option limits the output of memory
statistics to the designated stack member.
158