Dell Force10 Z9000 - Terminal Monitor

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Usage
Information
This command displays internal software driver information, which may be useful during
troubleshooting switch initialization errors, such as a downed Port-Pipe.
terminal monitor
Configure the FTOS to display messages on the monitor/terminal.
C-Series, E-Series, S-Series, Z-Series
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
logging monitor – sets the logging parameters on the monitor/terminal.
1393