Dell Force10 Z9000 - Show Storm-Control Multicast

show storm-control multicast
Display the storm control multicast configuration.
C-Series, S-Series, Z-Series, S4810
Syntax
show storm-control multicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the
interface specific storm control configuration:
• For Fast Ethernet, enter the keyword Fastethernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/ port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Example
FTOS#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------
Gi 1/0 Ingress 5
FTOS#
1403