Dell Force10 Z9000 - Show Ipv6 Fib Stack-Unit

NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ipv6 fib stack-unit
View all FIB entries.
S-Series, Z-Series, S4810
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number Enter the number of the stack unit. The range is 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary of
entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.4.2.1 Introduced on the S-Series.
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex
displays as zero (0) on the show ipv6 fib stack-unit output for neighbor entries,
such as address resolution protocol (ARP) entries.
849