Dell Force10 Z9000 - Threshold

Exception
1 0 L2ACL 1000 200
Allowed (5)
1 1 L2ACL 0 200
Exception
…
…
…
13 1 L2ACL 400 200
Allowed (2)
FTOS#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
E-Series, Z-Series, S4810
Syntax
threshold min number max number
To remove the threshold values, use the no threshold min number max number
command.
Parameters
min number Enter the keyword min followed by the minimum threshold number
for the WRED profile. The range is 1024 to 77824 KB.
max number Enter the keyword max followed by the maximum threshold number
for the WRED profile. The range is 1024 to 77824 KB.
Defaults none
Command Modes CONFIGURATION (config-wred)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
Use this command to configure the minimum and maximum threshold values for user-defined
profiles. Additionally, use this command to modify the minimum and maximum threshold values
for the pre-defined WRED profiles. If you delete the threshold values of the pre-defined WRED
profiles, the profiles revert to their original default values.
Pre-Defined WRED Profile Name
Minimum Threshold Maximum Threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
1230