Dell Force10 Z9000 - Ip Ssh Rsa-Authentication (EXEC)

ip ssh rsa-authentication (Config)
Enable RSA authentication for the SSHv2 server.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip ssh rsa-authentication enable
To disable RSA authentication, use the no ip ssh rsa-authentication enable
command.
Parameters
enable Enter the keyword enable to enable RSA authentication for the
SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Enabling RSA authentication allows the user to login without being prompted for a password.
In addition, the OpenSSH compatible SSHv2 RSA public key must be added to the list of
authorized keys (ip ssh rsa-authentication my-authorized-keys
device://filename
command).
Related
Commands
ip ssh rsa-authentication (EXEC) – adds keys for RSA authentication.
ip ssh rsa-authentication (EXEC)
Add keys for the RSA authentication.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip ssh rsa-authentication {my-authorized-keys WORD}
To delete the authorized keys, use the no ip ssh rsa-authentication {my-
authorized-keys}
command.
Parameters
my-authorized-
keys WORD
Enter the keywords my-authorized-keys followed by the file
name of the RSA authorized-keys.
Defaults none
1331