Dell Force10 Z9000 - Show Config

ffffffff ffffffff ffffffff ffffffff 00290104 000100b4
14141401
0c020a01 04000100 01020080
00000000
PDU[2] : len 19, captured 00:34:51 ago
ffffffff ffffffff ffffffff ffffffff 00130400
PDU[3] : len 19, captured 00:34:50 ago
ffffffff ffffffff ffffffff ffffffff 00130400
[. . .]
FTOS#
Related
Commands
capture bgp-pdu max-buffer-size – specifies a size for the capture buffer.
show config
View the current ROUTER BGP configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Example
FTOS(conf-router_bgp)#show confi
!
router bgp 45
neighbor suzanne peer-group
neighbor suzanne no shutdown
neighbor sara peer-group
neighbor sara shutdown
neighbor 13.14.15.20 peer-group suzanne
neighbor 13.14.15.20 shutdown
neighbor 123.34.55.123 peer-group suzanne
neighbor 123.34.55.123 shutdown
FTOS(conf-router_bgp)#
Related
Commands
capture bgp-pdu max-buffer-size – specifies a size for the capture buffer.
show ip bgp
View the current BGP IPv4 routing table for the system.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp [ipv4 unicast] [network [network-mask] [longer-
prefixes]]
387