dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network through the port. This
configuration is only takes effect in Multi-Auth mode.
C-Series, E-Series TeraScale, S-Series, S4810
Syntax
dot1x max-supplicants number
Parameters
number
Enter the number of supplicants that can be authenticated on a single
port in Multi-Auth mode. The range is 1 to 128. The default is 128.
Defaults 128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on the C-Series and S-Series.
Related
Commands
dot1x host-mode
dot1x port-control
Enable port control on an interface.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly authorize a
port.
auto Enter the keyword auto to authorize a port based on the 802.1X
operation result.
force-
unauthorized
Enter the keywords force-unauthorized to forcibly deauthorize
a port.
Defaults none
Command Modes Auto
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
202
To Next Page
Loading...
