Dell Force10 Z9000 - Terminal Xml

Parameters
screen-length Enter a number of lines. Entering zero causes the terminal to display
without pausing. The range is 0 to 512.
Defaults 24 lines
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
terminal xml
Enable XML mode in Telnet and SSH client sessions.
C-Series, E-Series
Syntax
terminal xml
To exit XML mode, enter terminal no xml.
Defaults Disabled
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.7.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced for the E-Series.
Usage
Information
This command enables the XML input mode where you can either cut and paste XML requests
or enter the XML requests line-by-line. For more information about using the XML feature, refer
to the XML chapter in the FTOS Configuration Guide .
188