Dell Force10 Z9000 - Redistribute Bgp

Related
Commands
• default-information originate – generates a default route for the IS-IS domain.
• distribute-list out – suppresses networks from being advertised in updates. This
command filters redistributed routing information.
redistribute bgp
Redistribute routing information from a BGP process. (New command in Release 6.3.1.)
E-Series, S4810
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2]
[metric metric-value] [metric-type {external| internal}]
[route-map map-name]
To return to the default values, use the no redistribute bgp command with the
appropriate parameters.
Parameters
AS number Enter a number that corresponds to the autonomous system number.
The range is 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1
routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1
and Level 2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes only. This is the default.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric
value that is consistent with the destination protocol. The range is 0
to 16777215. The default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. The two options are:
• external
• internal
route-map map-
name
map-name is an identifier for a configured route map. The route map
filters imported routes from the source routing protocol to the current
routing protocol.
If you do not specify a map-name, all routes are redistributed. If you
specify a keyword, but fail to list route map tags, no routes are
imported.
Defaults IS-IS Level 2 routes only
891