Dell Force10 Z9000 - Ip Ftp Username; Ip Telnet Server Enable

ip ftp username
Assign a user name for outgoing FTP connection requests.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip ftp username username
To return to anonymous FTP connections, use the no ip ftp username [username]
command.
Parameters
username Enter a text string as the user name up to 40 characters long.
Defaults No user name is configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
You must also configure a password with the ip ftp password command.
Related
Commands
ip ftp password – sets the password for FTP connections.
ip telnet server enable
Enable the Telnet server on the switch.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
118