Dell Force10 Z9000 - Show Inventory (C-Series and E-Series)

---------------------------------------------
0 0 up AC
0 1 absent
Example (stack-
unit)
FTOS#show environment stack-unit 0
-- Unit Environment Status --
Unit Status Temp Voltage
--------------------------------------------
0* online 49C ok
* Management Unit
show inventory (C-Series and E-Series)
Display the chassis type, components (including media), and FTOS version including hardware identification numbers
and configured protocols.
C-Series, E-Series
Syntax
show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media followed by the slot number.
For the C-Series, the range is 0-7. For the E-Series, the range is 0 to 13
on the E1200, 0 to 6 on the E600/E600i, and 0 to 5 on the E300.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Output expanded to include SFP+ media on the C-Series.
Version 7.7.1.0 Vendor field removed from output of the show inventory
media command.
Version 7.5.1.0 Introduced on the C-Series and expanded to include transceiver
media.
Version 6.2.1.0 Expanded to include the Software Protocol Configured
field on the E-Series.
Version 5.3.1.0 Introduced on the E-Series.
Usage
Information
The show inventory media command provides some details about installed pluggable
media (for example, SFP and XFP). Use the
show interfaces command to get more details
about installed pluggable media.
Example
The display output might include a double asterisk (**) next to the SFMs.
...
0 CC-E-SFM ** 0004875 7490007411 A
1 CC-E-SFM ** 0004889 7490007411 A
...
146