Dell Force10 Z9000 - Undebug All; Upload Trace-Log

undebug all
Disable all debug operations on the system.
C-Series, E-Series, S-Series, Z-Series
Syntax
undebug all
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command
upload trace-log
Upload trace log files from the three CPUs (cp, rp1, and rp2).
C-Series, E-Series
Syntax
upload trace-log {cp {cmd-history | hw-trace | sw-trace}| rp1
{cmd-history | hw-trace | sw-trace}| rp2 {cmd-history | hw-
trace | sw-trace}}
Parameters
cp | rp1 | rp2 Enter the keyword cp | rp1 | rp2 to upload the trace log from
that CPU.
cmd-history (OPTIONAL) Enter the keyword cmd-history to upload the CPU’s
command history.
hw-trace (OPTIONAL) Enter the keyword hw-trace to upload the CPU’s
hardware trace.
sw-trace (OPTIONAL) Enter the keyword sw-trace to upload the CPU’s
software trace.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
191