Dell Force10 Z9000 - Show Arp Retries; Show Hosts

Row Heading Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of configured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
Example
(Summary)
#show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83 0 83 CP
FTOS
Related
Commands
ip local-proxy-arp – enables/disables Layer 3 communication in secondary VLANs.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show arp retries
Display the configured number of ARP retries.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show arp retries
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0 Introduced.
Related
Commands
arp retries – sets the number of ARP retries in case the system does not receive an ARP reply
in response to an ARP request.
show hosts
View the host table and DNS configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show hosts
806