Dell Force10 Z9000 - Clear Alarms; Clear Command History

clear alarms
Clear alarms on the system.
C-Series, E-Series, S-Series, Z-Series
Syntax
clear alarms
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
This command clears alarms that are no longer active. If an alarm situation is still active, it is
seen in the system output.
clear command history
Clear the command history log.
C-Series, E-Series, S-Series, Z-Series
Syntax
clear command history
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Related
Commands
show command-history – displays a buffered log of all the commands entered by all users
along with a time stamp.
102