Dell Force10 Z9000 - Show Config

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
To display information about a named VLAN, enter the show vlan command with the name
parameter or the show interfaces description command.
Related
Commands
description – assigns a descriptive text string to the interface.
interface vlan – configures a VLAN.
show vlan – displays the current VLAN configurations on the switch.
show config
Display the current configuration of the selected VLAN.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes INTERFACE VLAN
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Example
FTOS(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
FTOS(conf-if-vl-100)#
942