Dell Force10 Z9000 - Cam-Profile

cam-profile
Set the default CAM profile and the required microcode.
E-Series
Syntax
cam-profile profile microcode microcode
Parameters
profile Choose one of the following CAM profiles:
• Enter the keyword default to specify the default CAM
profile.
• Enter the keywords eg-default to specify the default
CAM profile for EG (dual-CAM) line cards.
• Enter the keywords ipv4-320k to specify the CAM profile
that provides 320K entries for the IPv4 forwarding information
base (FIB).
• Enter the keywords ipv4-egacl-16k to specify the CAM
profile that provides 16K entries for egress ACLs.
• Enter the keywords ipv6-extacl to specify the CAM
profile that provides IPv6 functionality.
• Enter the keywords l2-ipv4-inacl to specify the CAM
profile that provides 32K entries for ingress ACLs.
• Enter the keywords unified-default to specify the
CAM profile that maintains the CAM allocations for the IPv6
and IPv4 FIB while allocating more CAM space for the
Ingress and Egress Layer 2 ACL and IPv4 ACL regions.
• Enter the keywords ipv4-vrf to specify the CAM profile
that maintains the CAM allocations for the IPv4 FIB while
allocating CAM space for VRF.
• Enter the keywords ipv4-v6-vrf to specify the CAM
profile that maintains the CAM allocations for the IPv4 and
IPv6FIB while allocating CAM space for VRF.
• Enter the keywords ipv4-64k-ipv6 to specify the CAM
profile that provides an alternate to ipv6-extacl that
redistributes CAM space from the IPv4FIB to IPv4Flow and
IPv6FIB.
microcode
microcode
Choose a microcode based on the CAM profile you chose. Not all
microcodes are available to be paired with a CAM profile.
• Enter the keyword default to select the microcode that
distributes CAM space for a typical deployment.
• Enter the keywords lag-hash-align to select the
microcode for applications that require the same hashing for
bi-directional traffic.
• Enter the keywords lag-hash-mpls to select the
microcode for hashing based on MPLS labels (up to five
labels deep).
• Enter the keywords ipv6-extacl to select the microcode
for IPv6.
550