Dell Force10 Z9000 - Clear Fip-Snooping Statistics; Debug Fip Snooping

clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port interface.
S4810 and MXL Switch
Syntax
clear fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/
slot
Enter the port-type and slot number of the FIP packet statistics to be
cleared.
port-
channelnumber
Enter the port channel number of the FIP packet statistics to be
cleared.
Command Modes EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
debug fip snooping
Enable debugging on FIP snooping.
S4810 and MXL Switch
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | rx]
Parameters
all Enter the keyword all to enable debugging on all the options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
rx Enter the keyword rx for debugging received packets.
Command Modes EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
626